Ductless Mini-Split Installation
Professional ductless mini-split installation throughout North Texas. Perfect for room additions, garages, and areas without existing ductwork.
Quick Answers: HVAC in North Texas
How do you size a mini-split for a Texas garage or bonus room?
We size by the load, not by square footage. A West-facing North Texas garage with an uninsulated overhead door and a hot attic above pulls far more heat than a shaded interior room of the same size, so we run a room-by-room load calculation that accounts for orientation, insulation, glass, and ceiling height. Get the BTU sizing wrong and an oversized inverter short-cycles (poor humidity control) while an undersized one runs flat-out and never catches up. Typical garages and bonus rooms here land on a 9,000-18,000 BTU single zone.
Single-zone or multi-zone mini-split - which do I need?
If you are conditioning one space - a converted garage, a sunroom, a new addition - a single-zone system with one outdoor condenser and one indoor head is simpler, cheaper, and slightly more efficient. Choose a multi-zone (one outdoor unit feeding several indoor heads) when you want independent temperature control in multiple rooms, such as a primary suite plus a home office plus a bonus room. Multi-zone keeps the outdoor footprint and refrigerant runs to a minimum, which matters on HOA-governed lots.
Can a mini-split fix a room my central AC never cools?
Usually, yes - that is one of the best uses for ductless in North Texas. Rooms over a garage, far additions, and finished attics are common dead spots because the central system cannot push enough air that far. A dedicated mini-split with no ductwork removes the duct-loss problem entirely and lets that room hold its own setpoint without overcooling the rest of the house.
No Ductwork? No Problem.
When you add a room, finish a garage, or convert a bonus space, extending the central system rarely works - the existing trunk and air handler were not sized for the extra load, and snaking new flex into a hot attic just spreads the comfort problems around. A ductless mini-split is a self-contained inverter heat pump: one outdoor condenser, a small refrigerant line set, and a wall, ceiling-cassette, or floor head that conditions the space directly. No new ducts, no duct losses, and precise zone control down to a single room. If the rest of the house has uneven temperatures too, ask about a zoned HVAC setup or a proper duct redesign.
Perfect Applications for Mini-Splits
Room Additions
Perfect for new rooms without existing ductwork
Converted Garages
Climate control for garage workshops or conversions
Home Offices
Dedicated comfort for work-from-home spaces
Master Bedrooms
Individual climate control for better sleep
Sunrooms
Year-round comfort in challenging spaces
Multi-Zone Homes
Different temperatures in different areas
Mini-Split System Options
Single-<a href="/blog/zoned-hvac-systems-design-installation-guide/">Zone System</a>
Multi-Zone System (2-3 Zones)
Multi-Zone System (4-5 Zones)
Mini-Split System Advantages
No Ductwork Required
Perfect for homes without existing ducts or room additions
Individual Zone Control
Set different temperatures in each room for maximum comfort
High <a href="/blog/energy-efficient-hvac-systems-north-texas/">Energy Efficiency</a>
Up to 30 SEER ratings for significant energy savings
Whisper-Quiet Operation
Indoor noise levels as low as 19 decibels
Quick Installation
Most single-zone systems installed in one day
Year-Round Comfort
Efficient heating and cooling in one system
Professional Installation Process
Site survey and <a href="/blog/hvac-load-calculation-methods-north-texas/">load calculation</a>
Indoor unit placement planning
Outdoor unit location assessment
Electrical requirements evaluation
Refrigerant line routing design
Professional installation day
System commissioning and testing
Operation training and warranty setup
Energy Efficiency Comparison
Window AC Units
High energy costs, poor efficiency
Central HVAC
Good efficiency, duct losses
Mini-Split Systems
Highest efficiency, no duct losses
Mini-Split Installation by City
We install ductless systems across North Texas - whether that is a garage conversion in Frisco, an addition or bonus room in Plano, or a home office in McKinney. We also serve Allen, Prosper, The Colony, Little Elm, and Addison.
Mini-Split Installation Pricing
Complete ductless systems with professional installation
Single Zone
One indoor unit with outdoor unit
Dual Zone
Two indoor units, one outdoor unit
Multi-Zone (3-5 zones)
Multiple indoor units, one outdoor unit
All prices include professional installation, electrical connections, and system setup. Additional costs may apply for electrical upgrades or complex installations
Need a Custom Quote?
Every HVAC situation is unique. Contact us for a personalized estimate based on your specific needs, equipment, and budget.
Mini-Split Installation Questions
Common questions about ductless mini-split systems
Still Have Questions?
Our HVAC experts are here to help with personalized answers for your specific needs.
Related Services & Areas
Explore our comprehensive HVAC services across North Texas
Need immediate HVAC assistance?
24/7 Emergency Service Available
Need immediate help? Call us!
(940) 390-5676
Get Your Mini-Split Installation Quote
Professional ductless system installation throughout North Texas
(940) 390-5676
Call for immediate service
North Texas
Frisco, Plano & surrounding
24/7 Emergency
Always available for urgent issues