Leaky Ducts

Symptoms and Testing

• Thermostat: correct mode and setpoint.
• Filter: replace if dirty.
• Breaker/fuse: reset once if safe. If it trips again, stop.
• Look for ice on lines or water near the air handler.
• Note any error codes.

Likely causes

• Airflow restrictions (filter, ducts, coil).
• Electrical parts (capacitor, contactor, sensors).
• Charge or metering issues.
• Control settings or failed sensors.

Safe checks you can do

• Replace filter; open closed vents.
• Clear debris around outdoor unit.
• Gently rinse outdoor coil with water if dusty.
• Photograph any error codes to share with tech.

When to stop and call

• Burning smell or sparking.
• Water near electrical parts.
• Ice formation.
• Repeated breaker trips.

How a tech will diagnose

• Static pressure and airflow tests.
• Capacitor/contactor/motor tests.
• Refrigerant readings (superheat/subcool).
• Control board and thermostat checks.
• Drain performance inspection.

Prevent a repeat

• Right filter and schedule.
• Fix duct static and add returns if needed.
• Seasonal tune‑ups with coil cleaning and drain service.

FAQ

• Is it safe to run with leaky ducts symptoms? Not if there is ice, water, or burning smell.
• Why did it happen now? Often heat, dust, or a weak part under stress.
• Will it resolve on its own? The root cause needs correction.

---

Last Updated: August 18, 2025

Jupitair HVAC serves all of North Texas including Plano, Frisco, McKinney, Allen, and surrounding areas. TACLA License #123456.